Ready to give your Supernote Nomad a custom look? Making your own DIY enclosure (back cover) is super fun. Let's dive right in!

What You Need

• A 3D Printer
• PLA or other filaments
• Your Supernote Nomad (White Edition or Crystal Edition)

Step-by-Step Guide

Step 1: Download the 3D Print Files
Here are the files you need. Click the links below to download them:

• Supernote Nomad White Edition 3D Print File
• Supernote Nomad Crystal Edition 3D Print File

Step 2: Set Up Your 3D Printer
Make sure your 3D printer is ready. Load your filament and get it all set up.

Step 3: Slice the 3D Model
Open a slicing software, import the 3D model, set the parameters and complete the slicing.

Step 4: Print the Enclosure
Hit the print button! Depending on your printer, this might take a few hours. Grab a snack and relax.

Step 5: Fit Your Supernote Nomad
Once your printer is done, carefully take the printed parts out. If needed, smooth out any rough edges.

Step 6: Snap It Together
Attach the enclosure with your Supernote Nomad. It should fit perfectly and all buttons and ports should be accessible.

Example 3D Print Enclosure

Here are some cool pics of the finished enclosures!